You should know by now that prolonging the damage will cost you more than what you had expected it to be that is why once you have noticed that there are tiles in your home or in your office that are coming loose, make sure to have it repaired sooner than later. Furthermore, we want you to know as well that letting tiles that are coming loose as is and not fixing it is not advisable as there are lots of dangers that comes alongside it, most especially when it comes of and break as the shards may trip us and cause us to suffer from injuries. There are quite a number of options that you have when it comes to your tile coming loose that are much better than anything else and we will be presenting them all to you here in this article.
One of the ways on how you can handle tiles that are coming loose is by means of pulling them all up and replacing them. But then again, the downside of replacing all the tiles that are coming loose is that it is not only expensive, there goes the fact that it can be messy and time consuming as well. Since the concern that you have is the few tiles that are coming loose, there is no need for you with replacement as you can just opt for a tile repair instead.
And since you feel like choosing tile repair over tile replacement, we want you to be informed about the things that you have to do before you proceed with it like cleaning the tiles first using a household cleaner. After you have cleaned the tiles and make it squeaky, it is now the time for you to put on the specialized ceramic glue onto the areas that have cracks. In order for you to make the tile stick to the floor, what you can do is to use a knife to force it to the floor and that knife as well can also be used to smoothen the area that is damaged. It is very important for you as well to let the glue work for twenty four hours as this way, you can make sure that it really sticks to the floor and won’t be moved.
If you see that the glue has already dried up, the next thing that you should do is to sand them down using sandpaper. You have to continue sanding down the dried glue until you achieve an area that is completely flat. You should not be rough when sanding the dried glue, instead, you have to be quick and be light at the same time.